VIRUTEX TOOLS
Price List
VENEERING TOOLS, HAND
POWER PLANERS, EDGEBANDERS, CLAMPS ETC. SEE LINKS ABOVE
ALSO......
---State of the art tools
and supplies---
Price List
IF YOU ARE ORDERING MULTIPLE PIECES,
PLEASE TRY TO ORDER IN
CASE QUANTITIES SHOWN TO AVOID BACK ORDERED ITEMS
THERE IS NO MINIMUM UNLESS INDICATED.
AU-93 DOUBLE EDGE TRIMMER $19.00ea
*Case quantities of 6*Case
quantities of 6 (not required)
AU-93-B AU-93 BLADES
$14.00ea
(replaces the blades once in the tool)
*Case quantities of 6*Case
quantities of 6 (not required)
(Trim edgebanding and veneer
edges with ease)
(This tool comes apart for one side trimming also,
this works better when working with wood veneers when tear-out occurs because
you can then choose the direction of the cut. You want to flow over wood-grain
pattern rather than cutting into the wood-grain pattern)
The
arrow indicates the correct cutting direction.
____________________________________________
- Edge Trimmer For straight panels
Follow same directions
above for AU-93-
ET6 15.00ea
*Case
quantities of 6
(not required)
Blades:
$9.00ea
*Case quantities of 6
(not required) -
(replaces the blades once in the tool)
-
When purchased in case quantities of 6 price
is $7.75 ea
-
-
- Edge Trimmer
- ET7 $14.00ea *Case
quantities of 6
(not required) (no blades available)
- For curved panels
_____________________________________________________________________________________
#V-300 Pressure Roller $25.00ea (Left)
*Case quantities of 5 (not required)
#J-Roller (Standard)-$16.00ea (Right)
*Case quantities of 5 (not required)
Non-Marking Rubber Roller
Zinc Plated Solid Steel Handle
Comfortable Vinyl Grips
____________________________________________________________________
RC21E END TRIMMER
$42.00ea *Case quantities of 4
(not required)
Perfect
end cuts on edgebanding
RC21E-B BLADES FOR END TRIMMER
$17.00ea *Case
quantities of 4
(not required)
(replaces the blades once in
the tool) ______________________________________________________________
CO15L Laminate Slitter: $140.00ea
(Replaced CO15E)
Our new micro metric fence adjustor will
assure you a very precise positioning up to 4-1/4" width.
It will also lock the fence into a very tight position. Any pressure from the
operator will not move the fence out of adjustment.
Cuts
strips of plastic laminate or veneer
C015L-B BLADES FOR C015L $33.32ea
(replaces the blades once in the tool)
TK-78 MOUNTING STAND FOR C015L $52.00ea
________________________________________________________________________
CO49K MOTORIZED
SLITTER, 30" capacity: $2500.00
+
shipping ( $150.00 / $180.00 West Coast )
CLICK TO SEE
THIS TOOL IN ACTION
- - Cutting width: 3/8" to 30"
- ( no width limit on 4'x8' sheets)
- - Cutting thickness : 0 - 3/32"
- - Speed : 32 Feet per minute
- - 110 Volts
-
-
-
-
-
-
- - Weight: 40 Pounds net weight. Packed in a wooden crate
- - Easy to work with
- - Easy to maintain
- - Easy to change the cutter wheels
- Automatic production laminate and veneer slitter.
- Final cut, accurate, precise, no splinter, inlaid quality edges. No
additional work required. No material waste
Cut strips of plastic laminate or veneer with ease
(no saw kerf for no
more waist)
________________________________________________________________________
U-78 LAMINATE-VENEER MITER CUTTER
$390.00ea
SEE THIS TOOL IN ACTION
Lower Blade Set for VX-U78
$30.00
Upper Blade Set for VX-U78 $30.00
Does perfect 90 deg. end cuts on plastic laminates or veneers
up to 5-1/2" in Width
(Great for cabinet
re-facing)
Can do angle cuts also, be creative!!!
_________________________________________________________________________
Multiple Fastening System, Tilting +
Swiveling
SVN470 - Vacuum Clamp $250.00 + SHIPPING
Watch a Demonstration video
http://www.youtube.com/watch?v=DTu9v2NXpQ4&context=C313e649ADOEgsToPDskLuI-GHvsGc_KxHe1_WoqUK
The SVN460 multiple fastening system consists of an SVN250 basic system fitted
on a tilting and swiveling support.
The SVN460 allows you to machine the edges and surface of the part without
changing the grip.
It includes an air distributor with four free sockets, which allows the
connection of SVN250 or SVN470 auxiliary units, equipped with valve and quick
connector to the pneumatic system. Also included in the equipment is a G-clamp
for quick clamping of the SVN460 system to the workbench and a set of three
rubber seals of different perimeters.
Available with the option of a set of four screws for fitting an SVN250 on the
base (0999102).
_________________________________________________________________________
Work Piece Holder Stand- SFV50
$145.00 + Shipping
Ideal for holding large
pieces for edge banding and other applications.
2 strong suction cups hold the work firmly so you can edge band around it
safely, accurately.
It holds the work piece firmly. The suction
cups may not work on rough or uneven surfaces.
Weight: 12 Pounds
Dimensions: 34 x 16 x 23 Inches
A set of clamps (part #6045710) is included to
clamp the stand to the table.
________________________________________________________
- Biscuit Joiner
- Model: AB11
$350.00ea
 SEE THIS TOOL IN
ACTION
Designed for
grooving panels easily & accurately.
The front fence can be adjusted for angle
and height and makes it easy
for miter, center or butt joining.
It includes a strong carrying case.
- Double insulation, 110V.,
650 W.
- No load speed of 10,000
RPM.
- Milling blade: 100x22x4 mm.
- Max. slot depth 20 mm.
- Weight: 3.2 Kg.
- Spare blade
set: AB11B
$63.00ea
-
- Biscuit / Splines:
Virutex brand :
Virutex brand 1,000
pieces per box
- No. 0: 47x15x4 mm slot depth:
8 mm
- No.10: 53x19x4 mm slot depth:
10 mm
- No. 20: 56x23x4 mm slot depth: 12 mm
- Items #0 #10 #20
- $40.00
per box of 1,000
- ________________________________________________________________________
________ ____Base
Cutter RZ170N: $635.00 +
Shipping
___________________________________________________________________
- Hand Iron HI65
For pre-glued edge banding tape. Not
PVC
- Cost: $65.00 ea
_______________________________________________________________
Virutex Water Based Glue Spreaders
EM-125T GLUER, WITH
IMPROVED LARGER TOP ROLLER $195.00ea
______________________________________________________________________________________________________________________________________________________
|
Door Hinge Router
(No template
required) |
|
|
Model FR129M:
Please e-mail us
for more info.
|
Description
FR129M enables you to make
recesses for rectangular hinges without using templates. The corner of
recesses will have radius of 1/4" for 1/2" bit, and 5/8" for 1-1/4" bit. For
hinges with square corner, optional accessory of 90º corner chisel item #RC29
can be used
Specifications:
110 V, 60Hz, 550 W,
30,000 RPM
Weighted Equivalent
Acoustic Pressure Level: 84.5 dB A
Usual Level of Vibration
(hand-Arm) < 2.5 m/S2
Chuck Diameter: 1/4"
Weight: 8.5 Lbs
|
Click to
Enlarge |
|
Corner Square Tool >>>>>>>>>>>>>>>
Item No. RC29 : $89.00
Blades: $28.00 |
 |
Special design for quick, precise mortising on doors
or other elements. Easy to work with at site or in the
work shop. Mortises doors that have already been
hung, without damaging the surface. Measurement
adjustment permits multiple mortises in record time.
Also able to work horizontally. Mortises grooved
doors or those with overlaps.
Advantages over competition:
-
Vacuum port
-
Mortise in horizontal and vertical position
- Advanced hydraulics for precision adjustment
and accurate grip
-Can mortise the face plate. You need to use a
corner chisel to square the edges.
Part # 2945471 - RC29M corner chisel
Equipped from factory with hard metal
lock mortiser 1/4" shaft. Includes
a 1" bit. Other size bits can be ordered.
Equipped from factory with hard metal lock mortiser 1/4"
shaft. Includes a 1" bit. Other size bits can be
ordered. E-Mail us your requirements.
|
 |
| |
|
Go To Products Page
| 
call: 1 888 443 3461 2nd line: 1 920 863
3571
fax: 1 920 863 3570
