FENNEL TAMBOUR DOORS
OUR OLD FENNEL PRODUCT STILL HAS SOME STOCK LEFT..........
Thanks for choosing Tape-Ease! We ask that you put together a list of the Fennel
components shown below that will make up your door. Then you can fax your order in using our
Quick Fax Order Form or E-MAIL US and phone in your CCard. We will go over the list and call if there is
any questions. *See instructions below under each component picture...
$80 MINIMUM ORDER - $10.00 Packaging Charge per order on Fennel Tambour only.
[CLICK HERE FOR INSTALLATION INSTRUCTIONS FOR FENNEL DOORS]


*These are 5/8" tall each. To figure out how many you need, divide your opening height by .625.
This will give you the total Slats you need. Than divide 96" by the door width. This will give you the
total FULL pieces that a 96" Slat will yield. Divide the total of slats needed by total FULL pieces that
a 96" Slat will yield for your door width. This will give you the total 96" Slats needed. 96" is the
only length that can be provided in any of the Fennel Tambour components.

*These handles come in 96" lengths only. 1 is needed per door. End Caps are required.

*This handle is made to accept a cabinet lock, it does not have a built-in lock.
A handle and a lock, or a handle with built-in lock can be used. (obtained by customer)
These handles come in 96" lengths only. 1 is needed per door. End Caps are required.

*For 96" Straight Tracks, you will need your door height, x 4. You may need to add more Straight Track if you do not want splices. If your cabinet depth is less than your door height, you will need 4 - 90deg corners per door so you can run the track along the top of your cabinet than down the back, otherwise, you need 2. Tracks only sold with a complete Fennel Tambour Door order.

*For 96" Straight Tracks, you will need your door height, x 4. You may need to add more Straight Track if you do not want splices. If your cabinet depth is less than your door height, you will need 4 - 90deg corners per door so you can run the track along the top of your cabinet than down the back, otherwise, you need 2. Tracks only sold with a complete Fennel Tambour Door order.

*Our Facia Profile comes in 96" lengths only. 1 is needed per door.

LIFTING MECHANISMS
Lifting Mechanisms:
This system is key to the successful use of larger tambour doors operating in a vertical application. The systems allow for easy operating tambour doors with vertical heights from 24” to 78”. Typically, a door shorter than 24” will not require the system. When using a single system, tambour door slat lengths should not exceed about 36”.36" to 48" doors will require two systems. The system requires a shelf in the top of the cabinet for mounting of the main system parts. No functional elements are visible outside the cabinet. Indivdual systems are available to control vertical door heights of up to 27-1/2”, 55” and 78” by widths of up to 36” (slat length).
[CLICK HERE FOR INSTALLATION INSTRUCTIONS FOR FENNEL DOORS]