|
| |
Hot Melt / Iron-on Veneer
Sheets
Select Grade Veneers
SEE PRODUCT INFO AND OPTIONS AT THE BOTTOM OF THIS PAGE...
OVER 65
SPECIE AND CUTS AVAILABLE
See our tools for edge trimming and slitting
|
Hot Melt / Iron-on Veneer
Sheets
PRICING: |
|
Flat-Cut Red Oak, Cherry & Maple are:
*QUICK SHIP
items, and can ship same day or next day.
See
10 mil Paper-Backed
for 10mil pricing on more wood specie.
Add $1.65 per sq ft. to these prices for hot melt veneer. (Pairs Only)
Other items can ship in 3 to 10 days. (inquire)
There is a 2 - 2' x 8' Minimum, except Red Oak, Cherry & Maple
Flat-Cut
Grain runs the 8' direction. X-Grain available in Maple,
Cherry & Red Oak
*See options below
ALL ITEMS BELOW ARE FLAT-CUT
UNLESS OTHERWISE SPECIFIED |
|
SPECIE |
1 – 4
sheets
Size: 2' x 8' |
5+ sheets
Size: 2' x 8' |
|
Cherry,
Premuim
*QUICK SHIP ITEM* |
$39.50 |
$37.28 |
|
Maple
*QUICK SHIP ITEM* |
$37.31 |
$35.16 |
|
Oak, Red
*QUICK SHIP ITEM* |
$33.20 |
$32.77 |
|
See
10 mil Paper-Backed
for 10mil pricing on more wood specie.
Add $1.65 per sq ft. to these prices for hot melt veneer. (Pairs Only) |
MANY MORE
AVAILABLE (CALL)
|
Click Here For
More AVAILABLE SPECIE |
5" x
8" Veneer Sample Book Available
About 45 samples, some exotics may be smaller sizes. $45.00
+shipping
Big Discounts For Large Quantities, Next Price Break at 50pc (call for price)
PRICES MAY CHANGE WITHOUT NOTICE, SEE
WEB-SITE ONLINE FOR CURRENT INFO
NO RETURNS ON SHEET VENEERS AFTER 30 DAYS
OF DELIVERY
PRODUCT DESCRIPTION:
Hot Melt or "Iron-on" Veneer Sheets are used for
many applications. These veneers are laid up in various cuts as seen above. They are cut using
our CO15E Slitter, scissors
or a straight edge with utility knife. Veneer edges can be trimmed with
our AU-93 Edge Trimmer
which comes apart, allowing you to trim veneer or edgebanding. We can
roll the veneer to be shipped in a cardboard container.
IRON-ON HOT MELT:
This veneer can be cut and applied using heat. Set your iron
to the cotton setting and heat surface thoroughly, With this product, you
must take extra care in thoroughly scraping the surface with a stiff scraper as the
glue is cooling. Do not use a j-roller. The
heating and scraping process may need to be done several times to ensure
adhesion. It is
stocked in Red-Oak, Cherry & Maple. Others have a
4 - 2’ x 8’ piece minimum at this time
with a 2 week lead-time.
|
Go To Products Page
|
HOT MELT IRON ON WOOD VENEER SHEETS
call: 1 888 443 3461 2nd line: 1 920 863
3571
fax: 1 920 863 3570
