QUOTE INFORMATION:
Please describe here as best as you can the area where you are
installing the Tambour Door. Include the type of cabinet material
and what it is being used for. You may also e-mail us pictures.  Ref. Job Name please. info@tapeease.com

  
Design 2 Standard Kits with Standard Parts:     
ML Line, Real Aluminum Face with Polypropylene Plastic Backer
MAXIMUM OPENING SIZES FOR PRE-CUT KITS>>>      46-1/2"w x 80-1/2"h

 _________________________________________________________________________________________________________________________________

1) Pick a Slat Profile & Color:
ML Line, Aluminum Clad - 3/4" Slat:    ML Colors:        Aluminum        Stainless Steel
 

ML Line, Aluminum Clad - 1" Slat   ML Colors:        Aluminum        Stainless Steel
   ***The 1" slat is about 8% more expensive then the 3/4" Slat above and may have limited availability.
____________________________________________________________________________________________________________________________________

2) Select your exact inside cabinet opening sizes where the unit(s) will be installed:  
       *(The dimension entered for the Height shall include needed space for the C3 Mechanism as well.)
Qty:         Width: 0.00" 18-1/2" 20-1/2" 22-1/2" 28-1/2" 34-1/2" 40-1/2" 46-1/2"         Height: 0.00" 22-1/2" 34-1/2" 40-1/2" 46-1/2" 58-1/2" 70-1/2" 80-1/2"         Depth: (12" min.):

Qty:         Width: 0.00" 18-1/2" 20-1/2" 22-1/2" 28-1/2" 34-1/2" 40-1/2" 46-1/2"         Height: 0.00" 22-1/2" 34-1/2" 40-1/2" 46-1/2" 58-1/2" 70-1/2" 80-1/2"         Depth: (12" min.):

Qty:         Width: 0.00" 18-1/2" 20-1/2" 22-1/2" 28-1/2" 34-1/2" 40-1/2" 46-1/2"         Height: 0.00" 22-1/2" 34-1/2" 40-1/2" 46-1/2" 58-1/2" 70-1/2" 80-1/2"         Depth: (12" min.):

*If you have more doors in Standard Opening Sizes, enter more here:
_______________________________________________________________________________________________________

3) Bottom Handles & Finger-Pulls:  

*Standard ML Line Kits are only available with our "Combo-Grip" Handle Profile.
*If a lock is needed, this is the wrong form, please go back.

*Mid-Grip Finger-pull: Kits 58-1/2" and taller will be automatically produced with the Mid-Grip inserted half way up the door so the user does not have to bend down to open it. Just below, you can choose not to have this Mid-Grip inserted.
    
     My door is 58-1/2" or taller and I do not want the Mid-Grip Finger-pull slat installed half-way up.

_______________________________________________________________________________________________________

4) Type of Cabinet unit is being installed into?  

*Type of Cabinet Box:        
   3 Sided Cabinet Box.
   4 Sided Cabinet Box.
     *3 Sided Cabinet Box refers to a cabinet opening where the door is going to come down and rest on a countertop, shelf or floor.
     *4 Sided is when you have 4 sides to your cabinet box.  
 

*Frameless or Face Frame Cabinet Box?
   Frameless        Face Frame
     *(Frameless cabinets will have only about 3/4" face width on front and no frame mounted on the cabinet box, see A5 or A3 pictures below)
     *(Face Frame cabinets will have a 3/4" thick wood frame mounted on the cabinet box face, see A6 picture below)
     *(The frame is usually 2" wide but can vary from about 1" to 3" in width)

________________________________________________________________________________________________________

5) Standard Kits Track Systems:       ALL TOP VIEWS OF SIDE TRACKS - A5, A6 or A3 are our three choices below         
   A5/Frameless Cabinet              A6/Face Frame Cabinet            A3/Inset mount

     *(A5 shows our standard installation for a ML, Design 2 Kit mounted to a 3/4" wide Frameless Cabinet Side.)
    *(A5 Face Frame Cabinet shows the track on a face frame cabinet. The opening size is measured from the edge of the face frame.)
    *(A3 shows if you are mounting inset on a Frameless Cabinet. Used also for any inset mounting inc Face Frame.
       The 3 Sided Cabinet Box Handle referenced above will always be used with the A3 track)
  
     Notes or questions on our Track Systems:
_______________________________________________________________________________________________________

6) Top Fascia or "Cover Profile"  
*(A Top Cover Profile is included in all of our Design 2 Tambour Door Kits)

   Send extra Cover Profile material for other use. Quote Qty. 98" Lengths

_________________________________________________________________________________________________________

7) Quote shipping type: Ground        2nd Day Air        Next Day Air        AM Delivery (AM for Air options Only)
     *Ground is the best rate, any air shipments can be very pricey.
     *Allow about 1 Business Day for quote processing. 2 weeks for producing Design 2 Kits. Expedited requests will be given asap priority.

_________________________________________________________________________________________________________