Veneer sheets, Tambour Doors Made to Measure, Curved Plywood, T-Molding, Cabinet Doors, Rehau Tambour, Edgebanding, Corbels, Rope, Antiques



   OTHER DOOR OPTIONS
       SORRY, DUE TO UNSTABLE MARKETS OUR PRICING MAY NOT BE CURRENT AT OUR WEB-SITE


CABINET DOOR PAGES  How To Order

Customer Testimonials | QUESTIONS | Refacing Tips | Pricing/Measuring info

      Our Door Construction | Door / Sample Starter Kit

GET QUOTE HERE>>>>>>> Online QUOTE Forms:
Door Quote Form
Molding/Drawer Boxes/Veneer etc. Form

Print Out Fax Form:
(Or copy/paste and send as attachment)
Door Quote Form

Molding/Drawer Boxes/Veneer etc. Form

Cabinet Door Form Instructions
Molding/Drawer Box Form Instructions

DOOR STYLES
Raised Panel Doors | Veneered Raised Panel | Flat Panel Shaker Doors
Thermofoil Doors | Drawer Fronts | Doors For Glass |
Other Custom Options
Appliance Panels | Mitered Doors | Applied Molding Doors | Quartered Circle Doors
Solid Wood Doors | 1 Piece MDF Doors | MDF Veneer Doors |
Wainscot Panels
MORE OPTIONS
Stile, Rail & Panel Profiles | Outside Edge Profiles | Drill for Concealed Hinges
Dovetail Drawer Boxes | Colors For Finished Doors | Wood Molding & Millwork
Face Frames |
Solid Wood Stock |  Veneers For Refacing
Fireplace Mantels
| Appliance Garages | Kitchen Accessories

OTHER DOOR OPTIONS
Include this info on your form. Use forms above to submit your quote.

Butt Doors:
Butt doors can be ordered on any doors style with an outside edge profile. Typically this is used when a pair of doors needs to have one long edge square where they butt together. Please specify Butt left or Butt right on all arched doors.

(Cost: $2.60 per door)
_______________________________

Half Lap Edge:
Half lap edges can be ordered on any door style or door edge. This is used on pairs of doors that meet in the center. The door on the right will open first unless otherwise noted. The left rail will be 3/8” wider than the right so the door stiles are the same the width on face.

(Cost: $17.50 per door).

V-Groove Panels:
V-grooves can be added to any door style that does not already have them. Specify either the single V-Groove VGP-1, 2 or 3 to be added in info column. You may also specify the width between each groove.
These options are not done on any slab drawer fronts or raised center panels. They can only be done on Flat Panel Doors and drawer fronts, or doors with our solid wood center panel profile P-204.

(Cost per sq ft)

½” spacing

1 ½”

2 ½”

$4.05

$3.90

$3.35

$2.85

$2.50



 Specify in the "Notes area"

ROUTED FINGER PULLS

Routed Finger Pull:
Finger pulls can be routed on the backsides of doors and drawers fronts.
The location must be clearly marked.
Please use the abbreviations listed below to indicate where you would like
the finger pull placed.

Finger pulls will only work with the following outside edge profiles:
E-101, E-104, E-105, E-106, E-110, E-114, E-115, E-117, E-118,
E-121, E-122, E-123, E-124, E-126 and E-127.

 (Cost: $4.40 per door).

Finger Pull Placement =
TL (Top Left), TC (Top Center), TR (Top Right),
BL (Bottom Left), BC (Bottom Center ),BR (Bottom Right)
LSB (Left Side Bottom), , LSC (Left Side Center), LST (Left Side Top),
RSB
(Right Side Bottom), , RSC (Right Side Center), RST (Right Side Top),

RADIUS CORNERS

Radius Corners:
You can add a radius to the outside edge of doors and drawer fronts. The following edges E-104, E-105, E-106, E-108, E-118, E-121, E-123, E-124
& E-126
.are available with a
Ό”, ½” or 1” radius.

(Cost: $6.95 per door).

Radius Corners (Front View) = RC (Specify 1/4", 1/2" or 1" in the "Notes area" 

LAZY SUSAN DOORS OR CORNER DOORS:

Lazy Susan Doors Or Corner Doors:
One option for these types of doors is to use a 45 degree miter corner joint. Each door will have one 3” stile that when mitered together gives the appearance of 2 Ό” stiles to match the rest of the door. This style will allow you to use a piano hinge or a pie cut hinge. Please enter the width size of the face of the door on the form, do not include the miter section.

Another option is to order one door with one 3” stile on the butt side and a 2 Ό” stile on the other door. This will give the illusion of both styles being 2 Ό” wide. Standard hinges can be used on these doors.

Use abbreviations on form as shown below.

Cost: 45 degree miter- $8.60 ea. includes 3" stile and  45° mitre.
Butt Joint:- $6.45 ea. door includes 3" stile and butt edge.

Lazy Susan = LZM (Mitered) or LZB (Butt). Include in "info" column on form.


 
 
Style Red Oak Hard Maple Cherry Alder Hickory White Birch White Oak Clear Pine Knotty Pine Soft Maple Paint Grade White Ash Walnut Rustic Alder Rustic Cherry Rustic Hickory
Val A $13.04 $16.42 $19.19 $15.29 $13.82 $14.42 $14.26 $15.85 $15.61 $13.99 $12.03 $14.26 $20.26 $14.87 $20.83 $15.84
Val B $16.55 $18.13 $22.70 $18.71 $17.32 $17.92 $17.77 $19.35 $19.12 $17.49 $15.53 $17.77 $22.22 $18.37 $24.34 $19.34
Val C $16.55 $18.13 $22.70 $18.71 $17.32 $17.92 $17.77 $19.35 $19.12 $17.49 $15.53 $17.77 $22.22 $18.37 $24.34 $19.34
Val D $30.579 $32.14 $36.71 $32.42 $31.34 $31.94 $31.78 $33.37 $33.13 $31.51 $29.55 $31.78 $39.04 $32.39 $38.35 $33.36
Val E CUSTOM - SEND TEMPLATE FOR PRICING
Val F $16.55 $18.13 $22.70 $18.71 $17.32 $17.92 $17.77 $19.35 $19.12 $17.49 $15.53 $17.77 $22.22 $18.37 $24.34 $19.34
Val G $16.55 $18.13 $22.70 $18.71 $17.32 $17.92 $17.77 $19.35 $19.12 $17.49 $15.53 $17.77 $22.22 $18.37 $24.34 $19.34
Val H $18.69 $20.24 $24.72 $20.62 $19.45 $20.04 $19.88 $21.44

$21.21

$19.62 $17.77 $19.88 $28.42 $20.48 $26.34 $21.43
Shelves $16.55 $18.13 $22.70 $18.71 $17.32 $17.92 $17.77 $19.35 $19.12 $17.49 $15.53 $17.77 $22.22 $18.37 $24.34 $19.34
Other species available by quote only:
European Beech, Red Birch, Butternut, Cedar, Lyptus,
African Mahogany, Genuine Mahogany,White Birdseye Hard Maple,
Rustic White Maple, Red Oak Quarter Sawn, White Oak Rift, Poplar.

For your Fast easy quote, use our:  Door Quote/Order Form

 

 

BACK TO CUSTOM MADE CABINET DOORS
Go To Products Page



[
CLICK HERE TO DOWNLOAD OUR ORDER FORM
]    
e-mail: info@tapeease.com
(Please - no un-wanted solicitation e-mails will be accepted) (CLICK HERE TO MAKE SURE YOU RECEIVE OUR RESPONSE)

TAPE EASE SUPPLY LLC
accepts credit card information by phone or by our secure fax and e-mail services.
We do not keep your Card info stored on our computer systems. You can be assured that your information is safe with us.

          PO Box 816      Denmark, WI 54208        
920-863-3571 or 1-888-443-3461      fax: 1-920-863-3570 (If faxing, follow-up with an e-mail to confirm receipt)
PLEASE NOTE: AT TIMES WE DO HAVE LIMITED PHONE SUPPORT, USING OUR FORMS OR E-MAILING IS USUALLY BEST
Open 8am to 4:30pm central time - Monday - Thursday
 (Sales office closes at Noon on Fridays)
Pricing may change and if so, you will be notified before your order is processed,
E-MAIL US with any questions.
©COPYRIGHT 1999 - 2021 TAPE-EASE SUPPLY LLC.  All Rights Reserved. Unauthorized use or duplication prohibited.